Get paid for the questions and custom requests you already get from followers.

Create your free Brillay link

For creators

How 3D modelers get paid for custom STLs, ring CAD and build plans

Sell custom STL parts, file edits, ring CAD, woodworking plans and MOC instructions from one link. Makers send measurements, pay upfront; you set the price.

Updated November 2026

Get paid for this β€” with Brillay

Is every 'can you make one for my blender?' under your prints still costing you a free Saturday in Onshape? You name the price and how many days it takes, so the next one arrives as an order already agreed and paid.

Brillay is a link in your bio where followers pay you directly for:

Custom WorkPaid QuestionsGoalsTipsPersonalized Videos

A follower who just watched your lid-fit test opens the link in your bio without leaving Instagram, attaches photos of her mixer's snapped gear cover beside a ruler, and pays by card as a guest. Your first listing could take that order tonight.

No monthly fee, you only pay a small platform fee when you get paid.

Most custom STL orders begin with a maker holding a snapped part, like a dishwasher-rack clip, a stand-mixer gear cover or the battery door of a remote nobody makes anymore, after Printables and Thingiverse turned up nothing that fits. That is when 3D printing designers get paid online: your Brillay Custom Work listing names the price and delivery time, and the maker pays there while attaching caliper readings, photos with a ruler in frame, their printer and their filament. The order is paid before you open CAD, and you hand over an STL, STEP or 3MF for that one object at three clearances plus a fit coupon that prints in ten minutes, while a one-line printability question, like sliding-lid clearance on a 0.4 mm nozzle, sells on its own as a written Paid Question. You sell the digital file; the maker prints, casts or builds it.

This is for you if you model in Fusion, Onshape, FreeCAD, Blender or ZBrush and your comments keep filling up with "can you make one for my blender?" It also covers jewelry CAD, woodworking plans, LEGO MOC instructions and papercraft templates, each in its own section below.

Why would makers pay for a model when Printables, Thingiverse and MakerWorld are free?

Because the free file was made for someone else's dishwasher. Free libraries cover the common case well: the cable clip, the Gridfinity bin, the benchy. The person who pays you usually has a broken object in hand and has already searched those libraries:

  • The part is discontinued. A stand-mixer gear cover, a trim clip from a model year nobody uploaded, a battery door for a remote that's no longer made.
  • The dimensions are their own. A drawer organizer for a 412 mm drawer, a bracket for a shelf standard with 32 mm hole spacing.
  • A free file almost works. It needs to be 15% bigger, carry a name, split for a 220 mm bed, or gain a boss for an M3 heat-set insert.
  • It's personal. A figure of their dog, a ring for their partner, a model of their first car.

You're selling fit and specificity, not a file format. Your listing headline can say exactly that: "I model the part you can't find, from your measurements."

Which custom 3D modeling services should you list first?

Start with two or three Custom Work listings and one Paid Question. Each Custom Work listing has a title, a description, what the follower gets, what you need from them, what's excluded, a price and a delivery time. The follower submits a brief with up to 5 files and pays before you start. You deliver one package: a written note, up to 5 files and/or links.

1. Replacement or functional part from measurements

  • Includes: one part, or one part plus the piece it mates with, as STL plus STEP. You can add a 3MF saved with your recommended orientation for Bambu Studio, PrusaSlicer or OrcaSlicer.
  • You need: caliper measurements, photos with a ruler in frame, printer, nozzle size and material.
  • Excluded: printing, shipping, and assemblies of three or more parts.
  • Delivery: usually 2–5 days.

2. Edit of an existing model

  • Includes: one set of changes to one file, such as resizing, adding a name, magnet pockets or screw holes, splitting with alignment pins for a smaller bed, repairing a non-manifold mesh, or rebuilding an STL as an editable solid.
  • You need: the file, its source link and license, and a numbered list of changes.
  • Delivery: often 1–2 days.
  • Check the license first. Many shared models are non-commercial or no-derivatives. If edits aren't allowed, offer to model an original part that does the same job.

3. One sculpted figure or miniature

  • Includes: one character, one pose, one base, such as a bust of their cat or an original character for their tabletop group at 32 mm scale. Deliver it presupported and hollowed with drain holes for resin, or split and keyed for FDM.
  • You need: front, side and back reference photos, the target scale, and resin or FDM.
  • Respect character IP. Pets, original characters and real people who agreed are fine. Copies of studio characters or branded miniatures meant for resale are not.

4. Paid Question: printability and design advice

Your comments are full of these. What clearance does a press fit need in PETG? Why does my snap fit crack at the root? Which orientation stops layer lines from splitting a hook? A Paid Question is one private question answered in writing, with up to two follow-ups. You choose the reply time, either 1–24 hours or 1–5 days, and the follower pays upfront as a guest with no call to schedule. The reply is text only. When you'd need to open their STL to answer, sell a "printability review" as Custom Work instead, so they can attach the file and photos of the failed print.

A listing you can adapt

Replacement part from your measurements, delivered in 3 days. I model one part, or one part plus the piece it clips onto. You get the STL at three clearances, a STEP file and a fit-test coupon that prints in about 10 minutes. I need caliper measurements in mm, top and side photos with a ruler, your printer and nozzle, and your material. Not included: printing, shipping, or parts whose failure could injure someone. Digital files only; printing, casting and building are done by the client; respect character and brand IP.

What should a maker measure and send so the part fits on the first print?

Most failed commissions start with a vague brief. Paste this checklist into the "what I need from you" field:

  • Caliper measurements in mm for every critical dimension: hole diameters, center-to-center spacing, wall thickness, and the size of whatever the part slides onto or clips into.
  • Photos from straight above and from the side, with a ruler in frame, taken from a step back and zoomed in to cut lens distortion, with the part flat on graph paper or a cutting mat.
  • For curves, a pencil trace of the outline photographed flat, or a profile gauge reading.
  • Printer, bed size and nozzle, for example a Bambu Lab P1S with a 0.4 mm nozzle, a Prusa MK4 or an Ender 3 V3.
  • Material and the part's job: PLA, PETG, ASA, TPU or resin, and the load, heat, flex or outdoor UV it faces. A dashboard clip shouldn't be designed around PLA.
  • Fasteners and fit: press or sliding fit, screw size (M3, #6), heat-set insert, magnet diameter.

A brief that needs no messages back reads like this: "Battery door for a TV remote, original lost. Opening is 46.2 x 21.8 mm, latch slot 3.0 mm wide and 1.2 mm deep. Printing PETG on a P1S. Four photos attached with a ruler."

How do you handle tolerances when there are no revision rounds?

Brillay has no built-in revision rounds, so build the fit into the delivery:

  • Send clearance variants. Export the part at 0.15, 0.25 and 0.35 mm clearance as separate STLs. That uses three of your five delivery files, and the follower prints whichever suits their machine.
  • Include a fit-test coupon. Ten minutes of printing to check a slot or a thread saves a two-hour print.
  • Send the STEP, so the follower or a friend with CAD can nudge one dimension later.
  • Write your correction and revision policy. Followers see it before they pay. For example: "If the part doesn't fit because my model doesn't match your measurements, I'll correct it once. If the measurements were wrong, that's a new order." After a Custom Work delivery, the follower can open the order's support conversation, choose "Correction or revision" and attach photos of the test print. You reply there and mark it completed.
  • Ask them to download right away. Delivered files stay available for 90 days.

Don't promise a fit you can't control. Printer calibration, flow rate, elephant's foot and filament shrinkage are on their side of the line.

Which requests should you turn down?

Put these in each listing's "what's excluded" field before the first order:

  • Parts where a failure hurts someone: child car-seat parts, climbing or lifting hardware, brake or steering components, anything that holds a person's weight.
  • Weapon components. Many designers refuse these as a fixed rule.
  • "Food safe" promises. Layer lines trap bacteria and you don't control the filament.
  • Copies for resale of licensed characters, game miniatures or brand logos, and remixes of no-derivatives files.

Declining in writing saves you from arguing about it in DMs.

How much should you charge for a custom STL?

Price the design, not the plastic. Most pricing advice for commissioned prints adds up filament, print hours, prototyping and complexity, because the seller is doing the printing. When you sell the file, filament and machine time are the follower's costs. Your price covers modeling time, complexity and the risk of a fiddly fit.

You set the price. Group listings by complexity instead of quoting every part from scratch:

  • Simple parts (spacers, knobs, cable clips, flat brackets): a common starting point is $25–$60.
  • Mechanical parts with fits (hinges, threads, snap fits, two-part enclosures): $60–$150.
  • Organic sculpts (busts, figures, pets): $80–$250, depending on detail and scale.
  • Edits to an existing file: $10–$30 for a simple change.

To check a number, time a real job. A shop-vac hose bracket might take 45 minutes to model plus 15 minutes to export three clearance variants and a coupon. Multiply that hour by what your CAD time is worth to you. That's your floor, and you can raise it as your queue fills.

Two more listings are worth adding: a rush version of your part listing with a 24-hour delivery time at a higher price, and a commercial-license listing for followers who plan to sell prints, with the terms written in its description.

No monthly fee, you only pay a small platform fee when you get paid. 8% platform fee when a follower pays for work, 5% platform fee on tips and goals. Card processing is separate.

What if a project won't fit in five days?

The longest delivery time you can set is five days, and each order is one delivery. Sell big builds in pieces and say so in the listing:

  • A cosplay helmet: the shell, split for a 256 mm bed, in one order; the visor mount and details in the next.
  • A custom chess set: king and queen first, then the remaining pieces.
  • An electronics enclosure: the main body with board standoffs first, then lids and mounts.

"This order covers the helmet shell only" tells the follower exactly what they're paying for.

How do jewelry CAD designers take ring orders online?

Your buyers are jewelers without an in-house CAD person, plus DIY ring designers who will take your file to a caster. The brief has to be exact:

  • Finger size measured with a metal ring sizer at a jeweler, not with string
  • Center stone shape and size in mm, for example an 8 x 6 mm oval, ideally measured by whoever will set it
  • Setting: four-prong, six-prong, bezel, halo or hidden halo
  • Band width, taper and profile (comfort fit, knife edge, flat)
  • Metal, so shank thickness and shrinkage allowance suit the casting
  • A sketch or inspiration photos

Typical listings are Engagement ring CAD with renders (an STL ready for castable resin or wax printing, plus renders from three or four angles) and Pendant model from a sketch. Many designers work in Rhino with MatrixGold, but the follower only cares that the file prints in castable resin and the stone seats properly; a few tenths of a millimeter in a seat matter.

Jewelers struggle to quote while silver and gold prices move and casting costs change. Selling CAD only keeps that out of your quote, because metal, casting and stones are priced by whoever makes the ring. On "how much does a custom engagement ring CAD cost": you set the price, and a common starting point for a solitaire with renders is about $150–$300, more for pavΓ©, a hidden halo or a matching band.

Write this into every jewelry listing: digital files only; casting and setting are done by a jeweler.

How do woodworking plan designers sell a custom 3D model and drawings?

What you add for a hobby woodworker is the model: they can orbit the piece, check its proportions against their room and change one number before buying lumber. Typical requests: a fold-up wall desk for a room with a 9-foot ceiling, a plant stand with splayed legs holding three pots at different heights, a console built around a 38-inch soundbar with a cable slot in the back panel.

Ask for:

  • Space dimensions, ceiling and baseboard height, and where outlets and studs are
  • What the piece has to hold or clear: the soundbar's width and depth, the pot diameters, the monitor on the fold-down desk
  • The stock they plan to buy, so the model uses real thicknesses: 4/4 hardwood, 3/4 plywood or construction lumber (a 2x4 is really 1.5 x 3.5 inches)
  • The name and published dimensions of any fold-down hardware kit
  • A napkin sketch or inspiration photos

Offer two listings that work alone or together:

  • 3D model of a build: the SketchUp or Fusion file with every part as a named component, plus front, side and top views. For a splayed-leg stand, the model gives the true leg angle and the compound miter and bevel to set on the saw.
  • Plan with cut list for a custom piece: a PDF of dimensioned elevations and an exploded view, a cut list taken from the model, a 4x8 sheet layout or board-foot estimate, and a hardware list.

One piece usually fits a 3–5 day delivery. You set the price; a common starting point is $40–$100 for a plant stand or console, more for a fold-down wall desk. Model around the kit's dimensions, leave installation to the kit's own instructions, and say in each listing that you supply the model and drawings while they do the building.

Your Paid Question here is best kept to design: will an 8-degree splay look squat on a 30-inch plant stand, or does a 16-inch-deep fold-down desk leave enough knee room? Ask them to type their dimensions into the question. When they want you to open their SketchUp file, sell a Custom Work "model check" so they can attach it. An occasional answer on joinery choice fits too.

How do LEGO MOC designers sell instructions?

Adult builders ask for instructions to a MOC they saw in your post, or for a custom build of their car, house or office. Offers that fit:

  • Custom MOC instructions PDF: a new build from their photos at an agreed scale, such as 6-wide or 8-wide vehicles, built in BrickLink Studio.
  • Parts list: a BrickLink wanted-list XML or a CSV so they can order exactly the pieces needed.
  • An adapted version of one of your MOCs: recolored to bricks they own, resized, or with retired parts swapped for current ones.

Price by part count and number of build steps. Box art or a set illustration for a personal project can be its own Custom Work listing. Followers in Europe and elsewhere pay by card from anywhere, and creators in 41 countries can get paid.

Care wording for every listing: instructions only; not affiliated with LEGO. Keep the LEGO logo off your PDFs and box art, and don't copy licensed sets for resale.

How do papercraft designers sell a template of someone's house or car?

The buyer is usually giving a gift: a childhood home before it's sold, a first car, a family cabin. You need photos of every side and the roof (or an aerial screenshot for the roofline), a door height for scale, the finished size, US Letter or A4, and whether they'll cut by hand or with a Cricut.

Deliver Papercraft model of a client's house or car as a PDF with fold lines, glue tabs and numbered parts, plus an assembly sheet, and recommend 65–110 lb cardstock. If they use Pepakura, include that file too.

Party decoration templates are quicker jobs: a name banner, a cake topper, or centerpiece boxes with the child's name and age. Use your own artwork for themed parties instead of tracing a studio's characters.

Can people who only print your free models support you?

Plenty of people print your free designs and never order anything. Give them two simple ways to thank you:

  • Tips: a one-time thank-you. You deliver nothing, and they join nothing.
  • A Goal: one named goal with a progress bar, such as "Second printer for test fits" or "Filament dryer for TPU and nylon." Followers make one-time contributions, and every contribution is yours whether or not the goal is reached. There's no deadline unless you set one, and nothing to ship.

How do you get started?

  1. Create your page at Start your Brillay page and pick your public name. Followers see that name on your page, at checkout and on their receipt, not your legal name.
  2. Add one Custom Work listing, the part from measurements, with the brief checklist pasted into "what I need from you."
  3. Write your support, correction and refund policies, including your decline list.
  4. Add a Paid Question for printability advice and set your reply time.
  5. Put the link in your TikTok and Instagram bio, and reply with it the next time someone comments "can you make one for my blender?" There's no follower minimum and nothing to apply for.

For the full walkthrough, see How it works.

Frequently asked questions

Do I have to print or ship anything?

No. Digital files only; printing, casting and building are done by the client; respect character and brand IP. You deliver files, renders, PDFs or links.

Can I edit a model a follower found on Thingiverse or Printables?

Only if its license allows derivatives. Ask for the source link in the brief and check before you start. If it's no-derivatives, model an original part that does the same job.

What file formats can I deliver?

Whatever the job needs: STL, 3MF, STEP, OBJ, 3DM, SKP, PDF plans or PNG renders. One delivery holds up to 5 files of up to 500 MB each, plus a note and links, and stays available for 90 days.

What if the part doesn't fit when they print it?

The follower opens the order's support conversation after delivery, chooses "Correction or revision" and attaches photos. You handle it under the correction policy they saw before paying. Clearance variants and a test coupon prevent most of these.

What does it cost to use Brillay?

There's no monthly fee and no paid plan. You pay a small platform fee only on orders that are actually paid, at the rates in the pricing section above, and card processing is separate. Details are on Pricing.

Can followers outside the US pay me?

Yes. Followers pay by card from anywhere as guests, without creating an account, and creators in 41 countries can receive payouts.

Start getting paid for the questions and requests you already get

Create your free Brillay link. No monthly fee, you only pay a small platform fee when you get paid. 8% platform fee when a follower pays for work, 5% platform fee on tips and goals. Card processing is separate.

Create your free Brillay link