Mechanics get paid for car questions online by charging a set price to read one thing: the estimate a shop just handed someone, the P-code on their scanner, or the noise that only shows up on a cold start. Line items, year, make, model and mileage arrive with the payment, and back goes a written read on which lines match the complaint, which can wait, and what to ask the service writer before signing. It works for dealer techs, independent and mobile mechanics, shop owners and serious DIY wrenchers whose comments fill up with "what's that noise?"
What do car owners actually ask a mechanic online?
Almost nobody messages you about a car they might buy. They message about the one in their driveway, usually right after a warning light came on or a shop handed them an estimate. The requests come in a few repeatable shapes:
- "Is this quote fair?" $1,400 for front pads, rotors and calipers on a car with 38,000 miles. A timing belt job that also lists a water pump, a thermostat, a coolant flush and a "fuel system service." They want to know which lines match the complaint and which are upsell.
- "What does this code mean on my car?" P0420 on a 2012 Camry, P0300 random misfire right after new plugs, P0171 and P0174 lean on both banks. They've read the generic definition and want your read on their engine.
- "What's that noise?" A clunk over bumps, a squeal at cold start that fades after a minute, grinding on light braking, a whine that rises with road speed rather than RPM.
- "I'm halfway through the job." The DIY wrencher with the old part out: which way the belt routes, the torque on the axle nut, whether a seized caliper bracket bolt means drilling or a new knuckle.
- "The shop says it's X, I think it's Y." Two diagnoses, one owner, and a car that has gone back twice for the same light.
The common thread: they already own the car, they already have some evidence (a code, a quote, a clip) and they want a fast, low-cost read from someone who has seen it a hundred times. That is a different job from a full diagnosis at your bay, and you can price it that way.
What should a mechanic sell on Brillay?
Start with two or three offers. Each one should spell out the input you need, because a complete request is the difference between a five-minute answer and an evening of back-and-forth.
1. Repair quote second opinion (Paid Question). The owner types out the estimate's line items: each part, the labor hours, the shop's labor rate, the complaint that brought the car in, plus year, make, model, engine and mileage. You write back which items fit the symptom, which are maintenance that can wait a few months, whether the labor hours look close to typical book time, and two or three questions to ask the service writer before signing. A Paid Question includes up to two follow-ups, which fits this trade perfectly: "they say the rear pads are at 3 mm, do I need them now too?" is exactly what owners ask next.
2. One car problem, answered (Paid Question). The owner writes the code or codes, freeze frame data if their scanner shows it, when the symptom happens (cold start, under load, turning left, above 50 mph) and what has already been replaced. You answer with the likely causes in order, the quickest low-cost check to do first, and what to tell the shop so they test before they start swapping parts.
A Paid Question is a typed exchange: one private question in, one written answer back, on your own time. When you need to hear the noise or see the paperwork, use Custom Work.
3. Clip, photo or scan report review (Custom Work). You publish the scope once: "Send up to 5 files: a 30-second video with sound, a photo of the estimate, your scan tool report. I reply with a written read and what to check next." The owner submits the brief with the files and pays before you start. You deliver a written note and can add files or links, such as a photo of their engine bay with the leak circled.
4. DIY repair plan for one job (Custom Work). For the owner doing it in the driveway: a written plan for one repair on their exact car, with a parts list (OEM numbers or the aftermarket brands you trust), the sockets and special tools, torque specs, the step where people usually get stuck, and the point where they should stop and take it in.
Then add Tips for the viewer whose "your video saved me $600" comment deserves a way to say thanks, with nothing for you to deliver. See Paid Questions and Custom Work for how each one looks to the follower.
What should the owner send with a question?
Most of a free DM goes on asking for details that weren't included. Put the checklist in your offer description so the request arrives complete:
- Year, make, model, engine size and mileage, and the VIN if trim or build date matters.
- The exact codes, not "the engine light is on."
- When it happens, and just as useful, when it doesn't.
- What has been replaced already, and whether a shop or the owner did it.
- For quotes: every line item, the labor hours and the shop rate.
- For a clip: filmed close to the noise, with sound, at the speed or RPM where it happens.
Custom Work listings also have room for what you need and what's excluded, so you can write "Not included: an in-person inspection, or a promise that the car is safe to drive" right on the offer.
How fast should a mechanic answer?
For quote reviews, speed is the product. The owner is often at the service desk or just got the lunchtime call asking for approval. A window of a few hours to same-day makes that offer worth paying for; three days does not. You pick the reply or delivery time for each offer, from 1 to 24 hours or 1 to 5 days.
Code and noise questions can take longer: 12 to 24 hours is honest for most working techs who answer after the shop closes. A clip review with several files or a DIY plan fits 1 to 3 days. Five days is the longest window, so keep every order to something you can finish in that time.
That matters for the big stuff. An engine rebuild, a restoration or a swap won't fit in one order, and there are no milestones built in. Sell one clearly scoped piece instead: "teardown read from photos: send pictures of the bearings, cylinder walls, pistons and timing parts and I'll tell you what looks reusable and what goes to the machine shop," or "gasket and parts list for one rebuild." Each piece is its own order.
How much should a mechanic charge for a second opinion?
You set the price. A useful anchor is what owners already pay for a look: many shops charge around an hour of labor just to scan and diagnose. Your written read is remote and quicker, so it can sit well below that and still pay for your time.
A common starting point is $15β$30 for one code or noise question, $25β$50 for a quote second opinion (more for a transmission, head gasket or other four-figure estimate), $40β$80 for a multi-file clip review, and $60β$150 for a DIY repair plan. Price the quote review against what is at stake: someone holding a $2,500 estimate will pay for twenty minutes of your judgment far more readily than they would book an hourly call. None of this is an income promise; adjust once you see which questions actually come in.
No monthly fee, you only pay a small platform fee when you get paid. 8% platform fee when a follower pays for work, 5% platform fee on tips and goals. Card processing is separate.
The full breakdown is on Pricing.
Some of your buyers will be other techs. A mobile mechanic asking what to bill for a fuel pump swap done roadside at night, or a new shop owner unsure about parts markup, is a Paid Question too, and often an easy one for you.
What can you promise from a code, a quote or a clip?
Put one line in every listing and every answer: Remote opinion, not an inspection; no safety guarantees: brakes, steering and tires need an in-person check; street-legal, emissions-compliant mods only. You haven't had the car on a lift, put a gauge on it or driven it, and the follower should know that before they pay.
- No safety guarantees. Brakes, steering and tires need an in-person check. A soft pedal, a grinding brake, a clunk through the steering wheel or a bulge in a sidewall gets "have this checked in person before you drive it," never a verdict that it's fine.
- When to say "park it." A flashing check engine light, a temperature gauge in the red, an oil pressure light or a fuel smell all get the same written answer: stop driving and get it looked at.
- No guaranteed results. A likely cause is a likely cause. Write "most likely" and "check this first," not "it's definitely the coil pack."
- Street-legal, emissions-compliant mods only. No emissions-delete tunes, no cat, EGR or DPF deletes, and no help getting a car through inspection that shouldn't pass. What you say about inspection or emissions rules is general guidance, not legal advice.
Being clear about limits is also good business. Owners come back to the mechanic who says "I can't judge that from a video, get it on a lift."
What changes for motorcycle mechanics?
Riders bring a different set of problems: a carbed bike that sat all winter and won't idle (varnish in the pilot jets), a chain with tight spots or sprockets worn into hooks, a battery that dies every week (stator or regulator/rectifier), and quotes for valve adjustments, fork seals or a tire mount. Good offers are "One bike problem, answered" as a Paid Question, where the rider types the model, year, mileage and their charging voltage at idle and at about 5,000 rpm, and "Second opinion on a repair quote." For a running clip or a photo of a chain, use Custom Work.
The stakes are higher on two wheels, so the care line is firmer. Safety first: anything about brakes, tires, steering head bearings or wobbles at speed gets "have it checked in person before you ride it." No safety guarantees, and the same remote-opinion line as for cars.
What changes for bicycle mechanics?
Bike owners ask about shifting that skips on two cogs (cable tension, a bent derailleur hanger or a stretched chain), a chain that drops off the small ring, hydraulic brakes that rub or feel spongy, a creak under load, and saddle height or reach. Prices run lower than car work; $10β$25 per question is a common starting point.
Three offers fit well. A written answer on a shifting problem from a video (Custom Work, since you need the clip: rear derailleur filmed from behind while they shift through the cassette). An upgrade parts list (Custom Work): they send their current groupset, freehub body and budget, and you return a compatible list, for example what a jump from 10-speed to 12-speed really requires. A used-bike check from photos: drive-side shots, drivetrain close-ups and the serial number. Be clear that photos can't clear a carbon frame for cracks, and that brakes need an in-person check. No safety guarantees.
What changes for small-engine repair?
Here the buyer is a homeowner with a mower that won't start in spring, a snowblower that dies in the first storm, a generator that runs but puts out no power after an outage, or a chainsaw that bogs at full throttle. The usual causes are stale ethanol fuel, a gummed carburetor bowl, a cracked primer bulb or a sheared shear pin. Ask for the engine model and type numbers stamped on the shroud, plus a photo of the spec plate if you take files through Custom Work.
This is where small jobs stop making sense at the bench: a shop minimum can cost more than the fix, and owners get told to buy new. A $15β$25 "mower or snowblower problem diagnosed" answer that points them to a $12 carb kit works for both of you without discounting your skilled bench labor. "Part advice," naming the right carb, plug or belt, is a natural second offer. Safety first: disconnect the plug wire before touching a blade, and generators run outdoors only. No safety guarantees.
What changes for car detailing experts?
Detailers have two kinds of buyers. Owners ask about swirls, water spots, etched bird droppings, whether a one-step polish will do or it needs compound, and which wash, decon and protection routine to follow. Ask for photos in direct sun or under a swirl-finder light, plus paint color, age and current products. "Product and process advice" works as a Paid Question; a "paint correction question" with photos works as Custom Work.
The second buyer is the new detailing business: how to price a disaster detail (pet hair, smoke, spilled milk, mold), how to set expectations so a client doesn't expect showroom gloss on fifteen-year-old clear coat, how to cut interior time, and when to hire. A pricing review of their service menu is a solid Custom Work offer. Care line: a remote opinion can't measure paint thickness, so recommend a paint depth gauge before heavy compounding, and no guaranteed results.
What changes for car modification advisors?
Enthusiasts want a plan, not a repair: "I have $3,000 and want my GTI to handle better" (tires, alignment and sway bars before coilovers), or "will 18x9.5 +35 with a 255 tire rub on my car?" Sell a custom build plan with parts list for their goals and budget as Custom Work, one stage per order, and a wheel or coilover fitment question answered as a Paid Question where they type bolt pattern, offset, width, tire size and current ride height.
The care line is non-negotiable: street-legal, emissions-compliant mods only. Plan around parts with a CARB Executive Order number where the state requires it, and remind them that lighting, tint and ride-height rules vary by state. Your plan is not legal advice, so tell them to confirm their own state's rules before they buy parts. Suspension and brake upgrades still need a proper install and alignment. No safety guarantees.
What changes for car audio experts?
DIY installers ask what amp will run two 12s, how to wire dual voice coil subs to an impedance the amp is stable at, what power wire gauge their run length needs, where the fuse goes, whether they need the big three upgrade, and how to add an amp to a factory head unit with a line output converter or a DSP. Sell a custom system plan for their car and budget and a wiring diagram for amps and subs, both as Custom Work: they send the car, the current gear and the goal, and you deliver a written plan with the diagram as a file. Care line: fuse the power wire close to the battery, and your plan is a remote opinion, not a check of their install. No safety guarantees.
How do you start taking paid questions?
Put your link in your bio, then say it out loud in your next video: "Got a quote you're not sure about? Send it through the link in my bio and I'll tell you what I'd do." When the next free DM arrives, reply with the link and your checklist. Followers pay by card as guests, with no account to make, and it works from your first follower: there's no minimum and nothing to apply for.
Followers see the public name you choose, such as your channel or shop name, on your page, at checkout and on their receipt; your legal name goes only to Stripe for verification and payouts. Creators in 41 countries can get paid. When a tool brand or parts seller asks about a sponsored video, the Work with Me form collects their budget, timeline and deliverables into a separate brand inbox. For audience-building tips, read Make Money on TikTok With a Small Following, see How it works, then create your page.
Frequently asked questions
Do I need ASE certification to sell repair advice?
Brillay has nothing to apply for, so the honest move is to describe yourself accurately in your offer: ASE-certified, dealer tech, 15 years at an independent shop, or experienced hobbyist. Owners decide who to trust, and stating your background plainly is part of the remote-opinion line.
What do I say when someone asks if their car is safe to drive?
Write that a remote opinion is not an inspection and that brakes, steering and tires need an in-person check. Give them the likely cause, then tell them to have it looked at before driving it, or to stop driving now if a warning light is flashing or the engine is overheating.
Can owners send me a video of the noise?
Yes, through Custom Work: the follower submits a brief with up to 5 files, such as a clip, a photo of the estimate and a scan report, and pays before you start. Paid Questions are a typed exchange, best for codes, symptoms and quote line items written out.
What does it cost me to use Brillay?
There's no subscription. You only pay the small platform fee shown in the pricing section above when a follower actually pays you, and card processing is separate.
Can I sell a full engine rebuild walkthrough?
Not as one order, since the longest delivery window is five days. Sell a scoped piece instead, like a teardown read from photos, a parts and gasket list, or a written plan for one stage of the rebuild, each as its own Custom Work order.
Do followers need an account to pay me?
No. They pay by card as a guest, right from your link, for one question or one job, with no membership to join.
Explore more