Get paid for the questions and custom requests you already get from followers.

Create your free Brillay link

For creators

Van build planners: get paid for layouts, solar sizing and wiring diagrams

Sell van, skoolie and tiny-house layouts, solar sizing and wiring diagrams as scoped Custom Work or Paid Questions. Builders pay upfront; you set the price.

Updated November 2026

Get paid for this — with Brillay

How many DMs did it take to scope a stranger's Sprinter wiring diagram before they went quiet? Publish the job once, with price, inclusions and delivery time, and the next builder sends their power list and pays before you draw a line.

Brillay is a link in your bio where followers pay you directly for:

Custom WorkPaid QuestionsGoalsTipsPersonalized Videos

A cabin owner pauses your shed tour on the inverter shelf, taps your bio link and pays by card as a guest right inside Instagram, without signing up for anything. The sizing order is in your inbox before the reel loops.

No monthly fee, you only pay a small platform fee when you get paid.

Van build planners get paid online for the decisions a DIY builder has to lock in before the first hole goes in the roof: where the fridge and battery box sit in a Sprinter 144, how many amp-hours a compressor fridge, Starlink and a diesel heater really need, and which wire gauge and fuse go on each run. The builder pays upfront and sends the van model, measured floor and ceiling, power list and budget; you send back a dimensioned layout, a sizing sheet or a one-line wiring diagram. A narrow question, like whether a smart alternator needs a DC-DC charger, sells as one written answer. Every deliverable is plans and diagrams only, for a qualified electrician to check.

This page is for people who finished a build and documented it: a Sprinter, Transit or ProMaster conversion, a skoolie, a tiny house on a trailer or an off-grid cabin running on its own panels. Once the build tour goes up, the comments shift from “nice” to “what size inverter did you use?” and “would this layout work in a 144?” On Brillay, each of those design jobs becomes a Custom Work listing with its own price, scope and delivery time, and the quick questions go through Paid Questions.

What can a van build planner sell, and what does each order include?

Most planners do best with two or three clearly bounded offers. These four match what builders actually ask for.

Custom layout plan for your van model (Custom Work). You deliver a scaled floor plan and one or two side elevations for one specific vehicle. The plan places the bed (a fixed platform with a garage underneath, a convertible dinette or a lift bed), the galley run, the fridge, the fresh and gray water tanks, seating and storage. It also checks that the sliding door, rear doors and swivel seats still open. You mark the wheel wells, the ceiling height after insulation and whether the tallest sleeper fits crosswise. That is usually comfortable in a ProMaster and often tight in a Sprinter or Transit. Three to five days is a realistic delivery time. You set the price; a common starting point is $90 to $200, depending on whether you deliver a hand sketch, a dimensioned 2D drawing or a 3D model.

Solar and battery system design with wiring diagram (Custom Work). You start from a load audit: every device, how much power it draws and how many hours a day it runs, added up to daily watt-hours. From that you size:

  • the battery bank, usually LiFePO4 at 12V or 24V
  • the solar array, fitted to the roof space left after the roof vent and windows
  • the MPPT charge controller
  • a DC-DC charger for charging from the alternator
  • an optional shore-power charger
  • an inverter large enough for any AC loads the builder insists on, such as an induction cooktop or a hair dryer

The main file is a one-line wiring diagram showing fuses, breakers, bus bars, the main disconnect and the wire gauge for each run. The sizing sheet and a parts list come with it. You set the price; a common starting point is $120 to $300.

Build sequence and parts list review (Custom Work). Some builders already have a plan and a full shopping cart and want a second set of eyes before they order. They send their order of work and their parts list. You send back a corrected sequence: sound deadening, insulation, wiring rough-in and roof penetrations all come before the walls and ceiling go up. You also flag anything missing, oversized or mismatched, such as a charge controller rated below the panel voltage or a cable run with no fuse at the battery. A common starting point is $60 to $150, delivered in two or three days.

Build question answered in writing (Paid Questions). The follower pays upfront to ask one private question, can ask up to two follow-ups, and you answer in writing. Typical questions:

  • “Is 200Ah enough for a compressor fridge and a powered roof vent running all night?”
  • “Can a 100Ah battery really run a 2,000W inverter for a hair dryer?”
  • “Can I fit a cassette toilet and a wet bath in a 144 without losing the garage?”

You set the reply window anywhere from 1–24 hours or 1–5 days, so you can answer between your own build days. A common starting point is $15 to $40. A Paid Question is text only, so if someone wants you to look at a diagram or photos, send them to the review offer instead.

The feature pages for Custom Work and Paid Questions explain each offer in full.

What should the builder send before you start drawing?

The brief decides whether you finish a plan in one evening or redraw it twice. Custom Work collects the brief at checkout, so if your “what I need from you” list is complete, every order arrives complete. For a van, ask for:

  • Make, model, year, wheelbase and roof height, for example a Sprinter 170 high roof or a Transit 148 extended high roof.
  • Interior measurements: floor length behind the seats, width at the floor and between the wheel wells, wheel-well height, and ceiling height before insulation.
  • Who sleeps in the van, the height of the tallest person, and any pets.
  • Must-haves and deal-breakers: shower or no shower, toilet type, bikes or boards in the garage, a desk for remote work.
  • The power list: fridge, powered roof vent, lights, laptop and monitor charging, Starlink, a diesel heater, induction or propane cooking, air conditioning.
  • How they travel: full-time or weekends, cold winters or desert summers, mostly driving or mostly parked.
  • Budget for the whole build and for the electrical system alone.
  • Anything already bought or installed, so you design around it.

They can attach up to 5 files: photos of the empty shell and the roof, a rough sketch, a load spreadsheet or a diagram they started. If someone cannot measure yet because they have not bought the van, they need a different job. Sell them a Paid Question about which model to buy before you sell them a layout.

How do you fit a big build plan into one order?

On Brillay you choose a delivery time of 1–24 hours or 1–5 days, and five days is the maximum. There are no milestones and no built-in revision rounds. A full design from bare shell to finished electrical takes more than one order, so package the work to fit.

Split it the way builders already think about it. The layout is one order. The electrical design is a second order, usually bought once the layout is settled and the builder knows where the battery box and roof vent will sit. A build sequence review can be a third. Each has its own scope, price and delivery time, and each one ends with a finished deliverable. Say it plainly in the listing: “This order covers the layout only; the solar and wiring design is a separate offer.”

You also write your own correction and revision policy, and the follower sees it before paying. A fair version for this trade: you fix errors in your own drawing, and changes to the brief after delivery are a new order. Changes to the brief means things like a different van, an added shower or a battery bank twice the size. After you deliver, the follower can message you on the order about a correction or a file that won't open. You close that conversation when it is resolved.

Each delivery is one package: a written note, up to 5 files and any links. A typical set is a PDF of the layout or diagram, the sizing spreadsheet and a parts list with links. You can add a screen-recorded walkthrough of the diagram, as long as it runs 20 minutes or less. Delivered files stay available for 90 days, so tell buyers to download them.

How much should you charge for a van layout or a solar design?

You set the price. The starting points above are common, but your own number should reflect how long the drawing really takes you, whether you deliver a sketch or a dimensioned model, and how complex the system is. A 12V weekend setup with a fridge and a roof vent is a different job from a 24V full-time system running air conditioning and induction cooking, and you can sell them as separate offers at separate prices.

Two habits help. First, price from your hours, not from how small a single DM feels. A careful wiring diagram with correct wire gauges and fuse ratings can take most of an evening. Second, keep a low-priced Paid Question available. Then the many people who need only one answer can buy one, and you never discount the full design to serve them.

No monthly fee, you only pay a small platform fee when you get paid. 8% platform fee when a follower pays for work, 5% platform fee on tips and goals. Card processing is separate. The details are on the pricing page.

Where does your responsibility end on electrical, weight and registration?

You are selling a design on paper. You never see the crimps, the torque on the battery terminals or the cut in the roof, so say that in every listing. For layout and full-system offers, use:

Plans and diagrams only; have a qualified electrician check the system; check local registration, zoning and building codes.

For wiring diagrams and electrical Paid Questions, use:

Plans and diagrams only; have a qualified electrician check your system.

In this trade those lines carry real weight:

  • A lithium battery can push huge current into a short circuit.
  • An undersized cable can overheat behind a finished wall.
  • Inverter output and shore power at 120V or 230V can deliver a dangerous shock.
  • Water, batteries, cabinetry and gear can take a van past its rated payload.
  • Re-registering a converted vehicle as a motorhome, and getting it insured, follows the rules where the owner lives.

Put these checks in your delivery note as a short list the builder can act on, not a disclaimer they skim past.

What changes if you plan skoolie conversions?

School-bus buyers often come to you before they own anything. They send auction listings and ask which bus to buy:

  • a short bus or a full-size
  • a flat-nose transit-style bus or a dog-nose conventional
  • which engine and transmission to look for
  • how serious the rust on the frame and floor looks in the photos

After the purchase come questions a van never raises: whether to raise the roof and by how much, what it takes to strip the seats and the rubber flooring, how to vent a wood stove, and what the finished bus will weigh with tanks, batteries and furniture.

Two offers fit. The first is a bus selection and conversion plan: the follower sends links or screenshots of the buses they are considering, their budget and how they will use the bus. You send back a comparison, your pick and an outline of the conversion phases. The second is a layout and systems plan: once they own the bus, you draw a floor plan for its real length and width, with water, power and heating placed. Both are larger than a van order, so scope them tightly and sell the full electrical design as its own order.

Registration is the biggest worry for skoolie owners. Reclassifying a bus as a motorhome or RV works differently by state and country, and some places require fixed sleeping and cooking facilities or an inspection. Use: Check local registration and code rules.

What changes if you plan tiny houses?

Tiny-house buyers face a choice vans never do: a trailer or a foundation. A tiny house on wheels must stay within road limits, usually 8 feet 6 inches wide and roughly 13 feet 6 inches tall in most US states before a permit is needed. So their questions are about trailer length, loft headroom, a ladder versus storage stairs, and how much weight sits over the axles. A tiny house on a foundation trades road limits for zoning: minimum square footage, accessory dwelling rules, setbacks and whether a composting toilet is allowed.

Two offers fit. The first is a custom tiny house layout plan: the follower sends the trailer or footprint size, who will live there, whether they need a main-floor bedroom and their must-haves. You return a floor plan and a loft section. The second is a build vs buy cost breakdown: they send a builder's quote or a shell listing along with their budget, and you compare three paths line by line: building from scratch, finishing a shell, and buying used. Tell them your layout is a planning drawing, not a permit set. Use: Check local zoning and building codes.

What changes if you plan off-grid solar for cabins and sheds?

Cabin owners, homesteaders and anyone powering a workshop or shed have plenty of roof but not enough winter sun. Sizing starts from the worst month, not the average. That means December peak sun hours where the cabin sits, how many cloudy days the battery bank should carry, and whether a generator fills the gap. The loads are bigger and harder than a van's: a well pump with a startup surge, a chest freezer, power tools, sometimes a mini-split. Battery banks often move to 48V, and the array may be ground-mounted at its own tilt.

Two offers fit. The first is custom solar and battery sizing for your cabin or shed: they send the location, their load list, how often they are there and their budget. You return array, battery and inverter sizing with a parts list. The second is a wiring diagram review: they upload a diagram they drew or got from a kit seller, and you mark up missing fuses, undersized wire and grounding problems. This work often touches a building's permanent wiring, so use: Design guidance only; follow local code and use a licensed electrician where required.

Why sell build plans from your own page instead of calls or DMs?

Most planners get paid today in one of three ways:

  • A booked hourly call. You hold a block of your week at a time that suits you both, often from a campsite with one bar of signal.
  • A price agreed in DMs and paid through a payment app. You write the scope again for every person and chase the money afterward.
  • A marketplace listing. The marketplace's ranking can show other planners to the people your build video brought in.

On Brillay you write the scope, price and delivery time once, and the brief arrives with the order. The builder pays upfront as a guest, by card, with no account to create. There is no follower minimum and nothing to apply for. Followers see the public name you choose, such as your channel name. Your legal name goes only to Stripe, for identity verification and payouts. Creators in 41 countries can get paid, and followers pay by card from anywhere. That matters because van, bus and tiny-house builders are spread well beyond the US. The full flow is on how it works.

A few other offers suit this audience:

  • Tips let someone who wired their van from your free video send a one-time thank-you, with nothing for you to deliver.
  • A Goal can fund your next build or the test gear you want to review. Followers make one-time contributions, every contribution is yours whether or not the goal is reached, and there is nothing to ship.
  • Brand Collaboration Inquiries: when a battery or solar brand wants to sponsor a build video, a Work with Me form collects their budget, timeline and deliverables into a separate brand inbox, away from builder orders.

How do you start selling build plans this week?

  1. Pick the two offers you get asked for most. For most van planners that is a layout plan and a solar and wiring design.
  2. Write a “what I need from you” list for each one, based on the brief checklist above.
  3. Choose a delivery time you can meet on a travel week, not your best week.
  4. Price each offer, and add a cheaper Paid Question.
  5. Write your correction and refund policies and paste the right care line into each listing.
  6. Put your link in your bio and in the pinned comment under your build tour, and answer the next “can you plan mine?” DM with it.

For more ideas that need no course, read what creators can sell without making a course. When you're ready, start your Brillay page.

Frequently asked questions

Can I sell a complete van build plan as one order?

Only if it fits in five days, and a full shell-to-finish design rarely does. Sell the layout, the electrical design and the build sequence review as separate offers, each with its own scope, so every order ends with a finished deliverable.

Can a builder send photos or a diagram with a Paid Question?

No. A Paid Question is a written question and a written reply, with up to two follow-ups. Anything you need to look at, such as shell photos, a wiring diagram or a load spreadsheet, belongs in a Custom Work review, where the follower can attach up to 5 files.

Do I need to be an electrician to sell wiring diagrams?

Brillay has nothing to apply for, but the rules on selling electrical design vary by place, so check what applies where you live. Whatever your background, label the work as plans and diagrams, and tell every buyer to have a qualified electrician check the system before it is energized.

What does Brillay cost a van build planner?

There is no subscription. A fee is taken only on orders that are paid, at the rates in the pricing section above, and card processing is separate.

Will buyers see my legal name?

No. They see the public name you choose for your page, at checkout, on their card statement and on their receipt. Your legal name goes only to Stripe, for identity verification and payouts.

Can I plan builds for people in other countries?

Yes. Followers pay by card from anywhere, and creators in 41 countries can get paid. Ask in the brief for measurements in the buyer's own units and for their AC voltage (120V or 230V), because voltage changes the inverter, the shore-power inlet and the parts list.

Start getting paid for the questions and requests you already get

Create your free Brillay link. No monthly fee, you only pay a small platform fee when you get paid. 8% platform fee when a follower pays for work, 5% platform fee on tips and goals. Card processing is separate.

Create your free Brillay link