A follower sends three photos of a walnut tabletop glue-up that opened at the ends, one of them shot in raking light, plus the tools they keep in half of a one-car garage, and asks what went wrong. Woodworkers get paid online for exactly that kind of message: a written fix for one joint or finish, a marked-up review of build photos, or a cut list drawn to one follower's alcove and the lumber their home center stocks, each priced by you on your Brillay page and paid for before you start. What you hand back is the fix, the marked-up photo or a PDF plan: plans and advice only; nothing physical made or shipped.
What do woodworkers and makers actually get asked?
If you post builds, you know these DMs already. Almost nobody writes "teach me woodworking." They arrive with one photo and one problem:
- "Why did this tabletop glue-up open at the ends a week later?"
- "My pine went blotchy under the stain. Do I sand it all back, or can it be saved?"
- "My planer leaves snipe at both ends of every board. What am I doing wrong?"
- "Can I cut these dovetails with a jigsaw and a pocket-hole jig? That's all I have."
- "Can you give me a cut list for the console table in your video, but 52 inches wide for my entryway?"
- "Is this bench strong enough for two adults?"
Nearly every one comes with the same context: a photo of the joint or the finish, a list of the tools they own, and a shop that is often a basement corner or an apartment balcony. That is what separates this from home repair help. Nothing in the follower's house is broken. They are building something on purpose and want a mentor's eye: why the tear-out happened, which joint suits a bed rail that has to come apart, what finish schedule works on cherry, how to adapt a plan to the lumber they can actually buy. Your answers are technique fixes, cut lists, settings and plans. That is the product.
Which offers should a woodworker start with?
Two offers cover most of what you get asked, and the line between them is simple: do you need to see something, or not?
Paid Questions are for anything the follower can describe in words. A follower pays upfront to ask one private question, with up to two follow-ups, and you answer in writing on your own time, with no live call or scheduling. That fits "Can I put oil-based poly over a water-based stain?", "Titebond II or III for an outdoor planter?" or "I have $400. Bandsaw or track saw first?" More at Paid Questions.
Custom Work is for anything you need to look at or draw. You publish the scope, price and delivery time; the follower sends a brief plus up to 5 files (photos, a short clip, a sketch with measurements) and pays before you start. You deliver a written note, up to 5 files, and/or links. Build reviews, finish rescues and custom plans all live here. More at Custom Work.
A rule of thumb for your inbox: if they can type it, send the Paid Question link. If they need to show you, send the Custom Work link.
What should each listing include, and what should the follower send?
Three listings match the requests above. Keep the structure and change the details to fit how you work.
Listing 1: One woodworking question, answered in writing (Paid Question)
- Covers: one joinery, finishing, glue, tool or wood-choice question, plus up to two follow-ups.
- Ask the follower to include: the species, what they are building, the tools they own and what they already tried. "Pine, water-based stain, wiped on, blotched badly on the end grain" gets a far better answer than "stain looks bad."
- Reply time: many woodworkers pick 24 or 48 hours so replies fit between their own shop sessions.
- Price: you set the price; a common starting point is $10 to $25.
Listing 2: Build photo review (Custom Work)
- Covers: a written critique of one project or one problem, such as the open miter, the tear-out on figured maple, the cupped panel or the topcoat that dried rough.
- Follower sends: up to 5 photos (the whole piece, close-ups of the problem, and one shot in raking light so surface flaws show), plus their tools, shop space and what they were aiming for.
- You deliver: a note on what went wrong, how to rescue this piece if it can be rescued, and what to change on the next one. A marked-up photo saves a paragraph.
- Delivery and price: two or three days is a comfortable window; a common starting point is $25 to $50.
Listing 3: Custom plan for one piece (PDF, Custom Work)
- Covers: one piece of furniture or one shop fixture drawn to the follower's numbers: a bookshelf for a specific alcove, a nightstand, a workbench sized to their garage, a miter-saw station.
- Follower sends: measurements of the space, an inspiration photo, their tool list, the lumber they can get (dimensional boards from a home center or rough-sawn from a yard) and their skill level.
- You deliver: a PDF with overall dimensions, an exploded view, a cut list, a plywood layout if sheet goods are involved, joinery notes and a shopping list.
- Delivery and price: up to five days; a common starting point is $60 to $150, depending on how many parts and joints the piece has.
In every listing, use the "what's excluded" part to say it plainly: plans and advice only; no physical furniture.
How should you price build help?
You set the price. A typed answer that takes you ten minutes can save a follower a $90 walnut board or a weekend of sanding, so price the quick answers so plenty of followers can say yes, and price plans on your drafting time: a cut list for a three-drawer dresser takes far longer than one for a floating shelf.
When a follower asks why they should pay when there are free videos, the answer is that free videos cover someone else's board and tools, and your reply covers theirs. Showing the price also filters out "just a quick question" DMs; the trade-offs are in Should You Show Your Prices Publicly?.
No monthly fee, you only pay a small platform fee when you get paid. 8% platform fee when a follower pays for work, 5% platform fee on tips and goals. Card processing is separate.
The full breakdown is on Pricing.
How big can a custom plan be when delivery tops out at five days?
You choose each delivery time from 1 to 24 hours or 1 to 5 days, and five days is the longest. There are no milestones and no built-in revision rounds, so each order should be one clearly scoped piece you can finish inside your window:
- A bedroom set becomes the bed plan first, then the nightstands as a separate order.
- A full garage shop build-out becomes the layout of one wall, or the workbench alone.
- A kitchen island with drawers becomes the carcass and cut list, with drawer details written as excluded.
Write your correction policy in plain words before anyone pays. If a dimension on a delivered cut list doesn't add up, the follower can contact you on the same order and you fix it there. Saying up front that a corrected plan is different from a redesigned one saves a lot of back-and-forth.
What do you say when a follower asks "is this safe?"
You will get "will this hold?" and "is my table saw setup OK?" Answer what you can see and know, and say clearly what you can't. A photo of a sled doesn't show you whether the riving knife is installed or how the follower stands at the blade.
Put this wording in your listings: plans and advice only; nothing physical made or shipped; follow tool, shop and radio-licensing rules; no safety guarantees. Your plans and feedback don't replace tool manuals, blade guards, push sticks, hearing and eye protection or dust collection. For anything that carries a person or a load, such as a loft bed or a wall cabinet full of dishes, say that you don't certify strength and that someone should check it in person. There are no guaranteed results either: how the piece turns out depends on the follower's cuts, glue-ups and finishing.
What changes if you refinish and flip furniture?
Your buyers are thrift and marketplace flippers holding a $40 dresser and a plan to resell it. They want to know what is on it, what to strip and what to paint over.
- Finish identification (Paid Question): the follower describes their test-spot results and you name the finish. Denatured alcohol softening it points to shellac; lacquer thinner points to lacquer; neither touching it usually means varnish or polyurethane.
- Refinishing plan from photos (Custom Work): they send the front, the top, a close-up of the finish, the inside of a drawer and any maker's stamp. You return a step plan: strip or scuff-sand, how to handle lifted veneer and water rings, whether red stain will bleed through white paint on old mahogany (a shellac-based primer usually blocks it), and which topcoat suits a dresser in daily use.
- Paint vs stain question (Paid Question): chalk paint, milk paint or gel stain over the existing finish, and when each makes sense.
A common starting point is $10 to $20 for a question and $25 to $45 for a plan. Care wording here: plans and advice only; no physical furniture. Remind followers to ventilate, follow the stripper's label, and test old painted pieces for lead before sanding.
What changes if you critique welds?
Welding students, farm-shop hobbyists and new MIG owners send bead photos and ask what's wrong. You are reading undercut, porosity, cold lap, uneven ripples and spatter, and you need the process, wire size, shielding gas, wire speed and voltage, metal thickness and position.
- Feedback on photos or video of your welds (Custom Work): up to 5 files, each up to 50 MB, so ask for close photos from two angles and a short clip of the run. You deliver the likely cause and the settings or technique changes to try next.
- Written answer on welding school and certifications (Paid Question): community college or trade school, what an AWS certification involves, a 3G or 4G plate test versus a 6G pipe test, and whether an apprenticeship makes more sense.
A common starting point is $15 to $35 for a critique and $15 to $25 for a career question. Care wording: general feedback; follow safety rules, with no safety guarantees. A photo shows the surface of the bead, not fusion at the root, so anything structural, such as a trailer hitch or a gate post, needs proper testing or inspection.
What changes if you troubleshoot 3D printers?
Your buyers have a pile of spaghetti on the bed and want to know why: stringing, layer shifts, elephant's foot, warped corners, under-extrusion, a first layer that won't stick.
- Print failure diagnosis from photos (Custom Work): ask for the failed print from several angles, the first layer, the printer model, the filament brand and type, and the nozzle and bed temperatures. You return the likely cause and the order to try fixes in.
- Slicer settings review (Custom Work): the follower attaches their project file or profile from Cura, PrusaSlicer, OrcaSlicer or Bambu Studio. You return an annotated list of changes, or an adjusted profile, with the reason for each.
A common starting point is $15 to $30 for a diagnosis and $25 to $50 for a settings review. If you already give away free models, add Tips beside them; see Add a Tip Jar to the Free 3D Models You Already Give Away.
What changes for scale model builders?
Armor, aircraft, ship and Gunpla builders want a critique of the bench, not a building project. Requests are about seam lines that show after priming, decal silvering, an airbrush that spits or dries at the tip, a canopy fogged by glue, and weathering: pin washes, oil dot filtering, chipping, pigments.
- Critique of your build from photos, with fixes (Custom Work): daylight photos, plus the paints (acrylic, lacquer or enamel), thinner and airbrush. You return what reads well, what doesn't, and how to fix it on this kit or the next.
- Airbrush or weathering question answered in writing (Paid Question): thinning ratios, pressure, what goes on in which order.
A common starting point is $10 to $20 for a question and $25 to $40 for a critique.
What changes if you design model railroad layouts?
The buyer is an HO or N scale modeler with a spare bedroom, a garage bay or an around-the-walls shelf, and the real constraint is the room.
- Custom track plan for your room size (Custom Work, digital file): ask for room dimensions with door, window and closet positions, the scale, minimum radius and turnout sizes, the era and railroad, and whether they want operations or a continuous run. You deliver a PDF plan, plus an AnyRail or XTrackCAD file if they use one. Digital plans only; nothing shipped.
- Wiring or operations question answered (Paid Question): reversing loops under DCC, power districts, staging, aisle width and duckunders.
A full basement empire won't fit in five days, so sell one deck, one room or a concept plan per order. A common starting point is $15 to $25 for a question and $75 to $200 for a room plan.
What changes if you mentor new ham radio operators?
Your buyers are studying for the Technician exam or holding a fresh callsign and an empty desk. They ask about question-pool topics, band privileges, a first radio (handheld, mobile rig or HF), an antenna for a lot with HOA rules, and why the SWR reads high.
- License exam question answered (Paid Question): one topic explained clearly, with up to two follow-ups.
- Radio and antenna recommendation (Paid Question, or Custom Work if you want photos of the yard or roofline): a first-station plan sized to their budget, space and license class.
A common starting point is $10 to $20 for a question and $25 to $40 for a station plan. Care wording: follow radio-licensing rules. Transmitting needs the right license class for the band, exams are given by volunteer examiners rather than by you, and RF exposure rules apply to their station. No safety guarantees.
What changes if you sequence Christmas light shows?
These buyers run xLights with Falcon Player, pixel props, a mega tree or a matrix, and want their house to dance to a song they picked.
- Custom xLights sequence for a song (Custom Work): the follower attaches their layout files (xlights_rgbeffects.xml and their networks file), a house photo, their prop list and the audio file they own. You deliver the sequence file. Sequence files only; buyers supply their own music, and you never provide the song.
- Layout mapping for your house (Custom Work): you build their props into an xLights layout from photos and measurements, delivered as layout files.
Demand piles up from September to early December, and a three-minute song with a matrix and a mega tree is real sequencing time, so price the busy season accordingly. A common starting point is $60 to $200 per song, depending on length and prop count, and $40 to $100 for mapping.
What about tips, goals and sponsored shorts?
- Lots of views, few followers. There's no follower minimum and nothing to apply for, so a short that took off on a small account can send buyers to your page the same day.
- Templates you already share. If you carve spoons or cut signs and post free patterns, keep them free and add Tips: a one-time thank-you, with nothing to deliver. A template drawn to someone's spoon size or lettering is a Custom Work order.
- A tool you're saving for. A Goal is one named goal with a progress bar, such as "Bandsaw for resawing" or "Enclosed printer." Followers make one-time contributions, every contribution is yours whether or not the goal is reached, and there's nothing to ship. See Set Up a Follower Goal to Fund a 3D Printer or GPU Upgrade.
- Brands asking about sponsored shorts. The Work with Me form collects a brand's budget, timeline and deliverables into a separate brand inbox, so you can price a sponsored short with the details in front of you.
- Personalized Videos. These fit makers less often, but a short video congratulating a follower's kid on a first birdhouse can be a warm extra.
How do you set this up this week?
- Scroll your DMs and pick the two requests you answer most. For most woodworkers that's a finishing question and a "what went wrong with my joint" photo.
- Write one Paid Question listing and one Custom Work listing, each with a clear list of what to send.
- Set the price and the reply or delivery time for each.
- Put the link in your bio and pin a comment on your next build video: "Send me your glue-up photos here."
- The next time a photo lands in your DMs, reply with the link instead of the fix.
You can create your Brillay page in a few minutes and take the first order before you've made anything new.
Frequently asked questions
Do I need a big following before I charge for build help?
No. There's no follower minimum, so a woodworker with 800 followers can take the same orders as a channel with 80,000. What matters is that people already ask you things.
Can I sell the PDF plans and templates I already made?
Brillay is built around work made for one follower: an answer, a review or a plan drawn to their measurements. Use your existing plan as the base and sell the adapted version, say the same bookcase resized to the follower's alcove and lumber, as Custom Work.
Do followers need an account to pay me?
No. A follower pays by card as a guest on your page, under the public name you choose, such as your shop or channel name. Your legal name goes only to Stripe for identity checks and payouts.
What does Brillay cost a woodworker?
Nothing per month. The platform fee only applies when a follower actually pays you, at the rates in the pricing section above, and card processing is separate.
What if a follower finds a mistake in my cut list?
After a Custom Work delivery, the follower can contact you on the same order, and you correct it in that conversation. Put your correction policy in the listing so they know before paying what counts as a fix and what counts as a new order.
Can I get paid if I'm outside the US?
Creators in 41 countries can get paid, and followers can pay by card from anywhere, so a woodworker in Canada, the UK or Australia can sell plans to a follower in Texas.
Explore more